Swimming pools provide a cooling respite from the summer heat. In order to enjoy one, though, cleaning and treating the pool’s water, is crucial. A pool that is full of debris discolored or stained, is not only unsightly but may also be detrimental to one’s health. Pool Supplies in Kansas City is what every pool owner needs to keep their cement pond in top condition.
• Chemicals -; Swimming pools require a specific balance of chemicals to inhibit and prevent bacteria and algae growth and keep the water clear. A chemical test kit is necessary to test for and adjust the levels of chlorine, pH, alkalinity, and calcium.
• pH Levels -; pH is a measure of the water’s acidity and ranges from 0 to 14, where 0 is highly acidic, and 14 is highly basic (alkaline). A measure of 7, or neutral, with the goal To keep the pH between 7.2 and 7.4.
• Chlorine -; This chemical is the sanitizing component for both salt and fresh water pools as it destroys bacteria and algae. Levels of chlorine should be kept between 1 and 4 ppm and is available in tablet and liquid form for fresh water pools. Salt water pools enlist the use of a chlorine generator that converts salt into chlorine.
• Algae Prevention -; Algae growth is the primary concern of most pool owners. Typically green or black, algae cover the sides and bottom of the pool and causes, filters to clog. The addition of algaecides will prevent common algae blooms.
Keep your pool sparkling clean using Pool Supplies in Kansas City such as nets, skimmers, brushes, pumice stones, and traps for leaves and debris. Using telescopic poles with skimmer nets attached make for fast and easy removal of floating debris. Also available with brush or vacuum attachments for pool sides and bottom.
Banks Blue Valley Pool & Spa Designs suggest emptying the filter pump basket and skimmer 3 times weekly and vacuuming at least two to three times a week. Brushing the pool’s bottom and sides will loosen tough dirt and make vacuuming easier -; even if using a robotic pool vacuum. Monthly inspections of the pool’s grout, tiles, and sealant should be performed, as well as checking vinyl liners for punctures, holes, or tears.
