Until somebody sees Septic Pumping in Bellingham WA being performed, they may have little understanding of what the work entails. They might think that to avoid seeing any unpleasant sights or smelling gross odors, the technicians only move the lid enough to fit the vacuum hose into. That’s not how it works, however.
Initial Inspection
The technicians excavate thoroughly around the tank and then completely remove the lid. They want to see whether there is anything they should report to the customers at that point. For example, they may see tampons, sanitary napkins or cigarette butts in the liquid. Those are some of the many items that should not be flushed into a septic tank, and they’ll talk with the customer about the problem.
Tank Pumping
After this brief inspection by technicians from a company like Burke Septic, they start the equipment and pump the tank completely. The waste is vacuumed into a big tanker truck that travels from property to property throughout the day.
Interior Inspection
But the work is not yet over. One of the technicians must actually climb inside and inspect the walls and pipes to make sure everything is still in excellent condition. Septic tanks and pipes should last for a very long time, but after decades, a crack might develop. Cracks that extend through the entire wall lead to raw sewage seeping through into the yard, which is a pollution and health issue.
Emptying the Tanker Truck
Eventually, the technicians empty the tanker truck at an approved location. That might be a wastewater treatment plant or a certified disposal field.
Concluding Thoughts
By scheduling Septic Pumping in Bellingham WA at the frequency recommended, homeowners can avoid sewage backups into the house. Typically, tanks should be pumped every two or three years. Some counties require proof that a tank is always pumped within a certain time frame.
A full tank not only increases the risk of a backup, it increases the risk of a septic system failure. Solids may start being pushed into the drain field, which is only intended to manage liquids. Those solids will damage the equipment in that leach field.