Thanks to a number of amazing inventions the quality of everyday life continues to improve. Although a number of these creations were designed purely for comfort or convenience, some were built to reduce the drudgery of certain tasks. One of these is the hot water appliance that provides heated water for bathing, cooking and cleaning purposes. For most homeowners, this appliance is a tank based water heater. The types of Water Heaters in Fort Wayne IN come in a variety of sizes to fit almost any circumstance. The only real problem with the design is the need to continuously heat the water for immediate use. Thankfully, this problem is being addressed with hybrid systems and heat pump technology.
The water heater is a simple design that becomes more complicated with the type of energy used to heat the water. For instance, an electric system uses one or more heating elements and a matching thermostat to control them. Natural gas systems require more complex controls because the fuel must be properly metered and the timing must be correct. The unit would be very dangerous if the gas were allowed to flow for too long before the pilot system ignites it. Thankfully, many of the problems that water heaters experience can be avoided with a bit of maintenance. This is especially useful with gas systems where the burner gets clogged with carbon or the exhaust becomes blocked or corroded.
A good deal of the problems that Water Heaters in Fort Wayne IN develop can be repaired. This includes issues with safety features such as the emergency release valve or the temperature safety switch. The former is designed to release excess pressure from inside the tank while the latter is used to keep an electric model from continuously operating if a shorted element develops. Both of these situations could be dangerous because an over-pressurized tank could explode and certain shorts in the electric element can allow the heated water to reach dangerous temperatures.If it is time to replace the unit, it might also be time to reevaluate the size of the model in use. The most common size for a water heater is forty gallons, although, smaller spaces may use the thirty gallon model. Larger tank sizes run to about eighty gallons, but it is important to consider other aspects such as initial hot water volume. Click Here to learn more.
