There is no question that a Garage Door Remote Scottsdale AZ can add a sense of convenience to a homeowner’s life. It makes it possible to get into and out of the garage, without having to exit the vehicle. The remote works by sending an infrared signal to the receiver that triggers the switch and prompts the electric motor to close or open the door. Prior to the remote being able to work, it has to be in the range of the IR device. If the remote is within range but is not working, there are some tips that can help a homeowner fix it.
Check the Remote’s Batteries
One of the most common causes of Garage Door Remote Scottsdale AZ failure is batteries that are dead or weak. To make sure the batteries are good, try to only purchase name-brand quality batteries, rather than discount brands. Also, while using rechargeable batteries may seem like the eco-friendly option, this type of battery will only put out about 1.2 volts, compared to the alkaline battery that emits 1.5 volts. This means when two batteries are present with rechargeable batteries, the remote is only getting a total of 2.4 volts but needs three volts to work properly. This lack of power can result in serious issues regarding the effectiveness of the remote control.
Check the Contacts for the Battery
If the contacts in the garage remote are wet, worn or dirty, then they can inhibit the electrical current from reaching the circuit board that is inside of the remote control. If the contacts appear discolored, wet or are pitted, it is important to dry and polish them. A homeowner can be polished with a fine grit sandpaper or fine steel wool.
If all else fails, it may be time to call in the professionals from Neighborhood Garage Door Service. They can provide troubleshooting tips that will help get the remote working quickly. Those who want to learn more about how to try and fix the issue on their own can also Visit the website for more information. Being informed is the best way to keep a garage door remote working properly.
Be the first to like.